- Place of Origin: Fujian, China (Mainland)
- Brand Name: XIAMEN BESTLINK
- Model Number: BL-01
- Plastic Modling Type: Stamping
- Color: Yellow
- Keyword: pushing air bag
Packaging & Delivery
China manufacturer quarry blocks pushing air bag
Air Pushing Bag is manufactured with High-tech materials and processed by special techniques, no frequent problem in split and damage. It performs primely and is suitable for blocks splitting after wire saw cutting in quarrying.
1,thickness less than 7mm
2,pushing power can be 20 to 200 tons
3,durable and repairable
4,cost is the lowest
We can manufacture the appropriate air pushing bag according to your requirement.
control panel complying with pressure regulator capable of inflating one to four pushing air bag simultaneously.
Hose and connect coupling:(B)
Generally ,for one pushing air bag, we could provide 5m long hose and two quick connect couplings for inflation and pressure control.
Quick deflating device:(C)
It can deflate the pushing air bag within a few minutes.
Model Deflating time
1.To avoid puncture the pushing air bag,start carefully clearing the debris on the edges of the blocks.
2.Choose air bag size and quantity according to the block’s size.
3.Tie one end of the rope with the ring at the upper edge of the bag and tie the other end to the fixed point.
4.Connect the air bag to the control panel and connect the controlpanel to the air compressor.
5.Start the air compressor and after the air flow is smooth,turn on the valve connected to the air bag. Pay attention to the presure gauge.
6.Continue inflating until obtaining gap of 10cm-15cm.then put appropriate wedges in the gap.
7.Overlap the air bags until the block is pushed down.
8.Shut off the air input valve of each bag,and disconnect the hoses with the bag. After the deflation is completed,pull out the bags.